| ADMIN 🧰 ⚙🔧 A little "behind the scenes work" is going to be happening over the next week or so. (Options that affect you are listed in this thread.)

[TerryP]

A lot on the back end for me!

Some things you'll see pop on and off on your end as well. I don't expect any down time, so to speak, other than a feature here and there; occasionally.

Comments, criticisms, suggestions, and all of that are welcomed.

---

---

---

---

YOUR CHANGES:

| ADMIN Post in thread '🧰 ⚙🔧 A little "behind the scenes work" is going to be happening over the next week or so. (Options that affect you are listed in this thread.)'

Today at 11:28 AM

#1. The News forums. ( Bama and SEC.)

The news Bot's are running every 12 hours now. This morning it came close to pulling 20 new articles (through Google.)

Let's assume you find one, like it, and want to comment. NORMALLY, those comments (and that thread) would remain on the UA News page (or SEC.) Now, we all know the majority of the traffic is here, on Fansights.

So..here's your "answer" to creating conversation about those articles ...

By either liking or replying to the post(s) it'll be moved here on Fansights. It's NOT going to be immediately. The cron job...

• TerryP

---

---

---

---

| ADMIN Post in thread '🧰 ⚙🔧 A little "behind the scenes work" is going to be happening over the next week or so. (Options that affect you are listed in this thread.)'

Today at 11:41 AM

On each post within every thread you'll see it is numbered (far right side) 1, 2, 3, and so on. That number serves as a direct link to that post. It's not the whole thread, or that page, but that post.

Now, another little tweek but this is a combo with the +quote and Reply options.

This one isn't a big deal depending on the post you are quoting. If you choose this route, you don't have the auto generated click to expand options...makes it a bit easier on others reading the topic.

IF you copy that link address (right click, copy link address) and here from Ricky's ..just post it...it...

• TerryP

 

[Rsedge72]

A lot on the back end for me

Hmmmmmmm!!!!!

 

[rammerjammer]

 

[Crimson&WhiteGecko]

Looking good so far!

 

[TerryP]

Looking good so far!

I was looking over a few thumb drives I have, things I've saved on One Drive, etc. and I started counting this morning. As it ended up I found almost five hundred modifications I've written, or downloaded, or "stumbled across (that does that?)" dating back to around 2004. @doemasters might be able to give a more accurate date. Some of these things I built for TOS. Some of its funny to me with things I built in that are core now. (They dropped an upgrade on me last night when I broke something yesterday. )

 

[TerryP]

Hmmmmmmm!!!!!

I expected Purl Jam to jump on this one...but, if I'd thought about it, I'd have said "a lot around my neck" or something like that.

 

[rick4bama]

I was about to ask about the new look! I likely!! I likely!!

 

[TerryP]

#1. The News forums. ( Bama and SEC.)

The news Bot's are running every 12 hours now. This morning it came close to pulling 20 new articles (through Google.)

Let's assume you find one, like it, and want to comment. NORMALLY, those comments (and that thread) would remain on the UA News page (or SEC.) Now, we all know the majority of the traffic is here, on Fansights.

So..here's your "answer" to creating conversation about those articles ...

By either liking or replying to the post(s) it'll be moved here on Fansights. It's NOT going to be immediately. The cron job, it's set to run every few minutes now.

So, if that was TLDR, it's basically this ... reply, like a post on the News forums and it's moved here for everyone to talk about.

 

[TerryP]

On each post within every thread you'll see it is numbered (far right side) 1, 2, 3, and so on. That number serves as a direct link to that post. It's not the whole thread, or that page, but that post.

Now, another little tweek but this is a combo with the +quote and Reply options.

This one isn't a big deal depending on the post you are quoting. If you choose this route, you don't have the auto generated click to expand options...makes it a bit easier on others reading the topic.

IF you copy that link address (right click, copy link address) and here from Ricky's ..just post it...it renders this.

https://rolltidebama.com/threads/toolbox-wrench-a-little-behind-the-scenes-work-is-going-to-be-happening-over-the-next-week-or-so-options-that-affect-you-are-listed-in-this-thread.571956/post-1583900

And here's a simple paste of the URL / link to Ricky's post.

| ADMIN Post in thread '🧰 ⚙🔧 A little "behind the scenes work" is going to be happening over the next week or so. (Options that affect you are listed in this thread.)'

Today at 10:08 AM

I was about to ask about the new look! I likely!! I likely!!

• rick4bama

[EMBED content="post-1583900"]https://rolltidebama.com/threads/toolbox-wrench-a-little-behind-the-scenes-work-is-going-to-be-happening-over-the-next-week-or-so-options-that-affect-you-are-listed-in-this-thread.571956/post-1583900[/EMBED]

 

[RTB.com]

The "GameCast" is up and running...several ways to use it. I'll launch it Saturday morning for A&M